
LNG ship at dock

LNG Tank Farm
LNG ship at dock
LNG Tank Farm
Enter PenEdu’s Learning Management System (click the link above), Registration create your personal web portal to launch courses and store training records.
LNG Plant Operations – Gas Treating reviews the hazards of working around hydrogen sulfide. It examines the operation of filter-separators, amine units, and mole sieve dehydrators, including common troubleshooting problems. (30 minutes)
Examines the potential hazards that could occur as the result of small and large releases of LNG. (35 min)
Gives a brief description of LNG facilities and their functions and operations. This course also defines common terms and examines applicable regulations and standards. (30 min)
Examines the hazards of working around hydrogen sulfide. This course also reviews the operation of filter-separators, amine units, and mole sieve dehydrators, including common troubleshooting problems. (30 min)
Reviews popular LNG technologies. Also discussed are shut down and start-up of the liquefaction process, including cool-down, purging, and common operating problems such as freezing and leaks. (30 min)
Describes the degrees of containment of LNG storage vessels, how they are constructed, and how boil-off gas is handled. This course also examines the cool-down and regasification processes, types of vaporizers, and operational issues associated with vaporizers. (40 min)
Describes pumps, including in-tank pumps, and explains how and where they are used in an LNG plant. This course also examines how and where compressors are used, including those used in boil-off gas and refrigeration applications. The main types of compressor drivers and their features are discussed, as well. (30 min)
Discusses the various process instruments used to measure pressure, flow, level, and temperature. The second phase of the course explains the use of control instruments, control systems, and DOT requirements for control systems. (50 min)
Examines protocols, equipment, safety, security, and procedures for LNG transfer operations from ships to import terminal facilities. The course also takes a brief look at transfer operations involving LNG truck trailers. (65 min)
Discusses the codes, standards, and references that apply to the design, construction, and operation of LNG facilities. Materials that are suitable for LNG service, testing methods, design, inspections, and documentation requirements are also explained. (35 min)
Discusses the welding process, welding techniques, test methods, and certification of welders. The second phase of the course explains the types of corrosion, typical locations of corrosion, and methods of controlling corrosion. The last phase of the course discusses the DOT requirements of the maintenance process, including training and documentation. (40 min)